Common features for LabF and LabV series• Each series is available in 3 different versions depending on the range of flow rates • 4.3 " LCD colour touch screen • Display of the dispensed volume, dispensing time, pause time and setting parameters on the same screen • Adjustable dispense parameters: volume, duration, pause time and number of repetitions • Calibration function for more precision • Fast-running function to rinse and fill the hose • RS232 and RS485 communication port for control according to the MODBUS protocol • Parameters storage in case of power failure • ABS case • Available in 1, 2 or 4 single-head versions • Pedal control included for each pump
• For smoothly transferring liquids • The liquid is pushed into the tubings thanks to ten traction rollers that push the liquid forward without pulsing • Adjustable speed • The Minipuls is supplied without distribution head • Robust construction • Easy to install • Easily interchangeable tubings: simply open the cams and each tubing is changed independently • Choice of 6 heads: 1, 2, 4 or 8 channels at standard speed; 2 or 4 channels at high flow speed • Wide range of tubings: standard version: 0.3 µl/min to 30 ml/min (max. pressure 0.5 MPa); high flow version: 1 ml/min to 220 ml/min (max. pressure 0.3 MPa)
• Version S with manual flow control, RC version with manual control or external control of the unit (cable supplied) • Allows dry start and self-priming • IP65 protection class • Engine life 10,000 hours of use • Overheating protection
• High precision and robustness • Memory of the last parameters in case of power failure • Accepts tubing with internal Ø less than 2.54 mm • 12 rolls for unequalled flow stability
• Full speed button • Automatic control via communication interface • LED display with dispensing speed • ABS plastic housing • Available in 1-, 2- or 4-channel version
• Control panel located directly on pump housing • External TFT touch screen with menu for advanced functions • Rapid tool-free changing of pump heads • Automatic detection of pump heads and hoses (only valid for Hirschmann hoses) • Calibratable for more precision • USB and RS232 interface for PC connection • Detection of pipe rupture and blockage • White casing in saturated polyester resin, IP 54 • Backup up to 20 methods • Pumps are available in 50 or 100 depending on the range of speed / flow range • Flow version for liquid circulation (flow function) • Volume version for dosing (many adjustable variables: duration, volume, given volume in a given time, programming of variable cycles, speed scaling) • Pump to be completed with a head sold separately
• ABS engineering plastic housing, 3.2 inch blue LCD screen • Quiet pump with low power consumption • For constant flow liquid transfer • Possibility of pre-setting an operating time for liquid dispensing • Rotary knob for setting the Speed (0.1 rpm increment) • Calibration function for more precision • On / off function, change of rotation direction • Power down memory function • RS232 and RS485 communication port for control according to the MODBUS protocol: start / stop, rotation direction (switching signal), Speed (0-5 V , 0-10 V, 4-20 mA) • Fast-running function for rinsing and filling the hose • Control of the start and stop functions by pedal or computer thanks to the communication port (RS232 and RS485) • Available with self-locking pump head type YZ1515x for flow rate of 0.007 to 570 ml / min, 1, 2 or 4 channels depending on model chosen • Available with Low Flow Rate Pump head MC1 (10 rollers), from 1 to 12 channels depending on model chosen
• Quiet pump with low power consumption • For constant flow liquid transfer • Easy change of tubing • Rotary knob for speed adjustment (0.1 rpm increments) • On / off function, change of rotation direction • Settings kept in memory in case of power failure • RS485 communication port for control according to MODBUS protocol: start/stop, direction of rotation (switching signal), speed (0-5V , 0-10V, 4-20mA) • ABS housing • Autoclavable hoses and connectors