For security reasons, you will be logged out in 4 minutesThis video has been hidden to respect your third-party cookie preferences.Authorise YouTube cookies when viewing videos presenting our products or services.
Complete water pump, made from high resistance polypropylene, for creating vacuums and suction of liquids.
The pump is supplied complete with: • a nut connector for R3/4'' tap, an R1/2'' reducer connector and a connector for vacuum hose barb fitting pipe ø external 10 - 12 mm; • an unscrewable connector for vacuum hose barb fitting connector with external diameter 6 - 9 mm and a GL 14 screw cap
Manual pump to create a vacuum by suction. Supplied complete with: • calibrated vacuum gauge in inches and cm Hg; • 1 PVC pipe 60 cm, internal diameter 6.3 mm (1/4'').
• 100% oil-free transfer • Maintenance-free • Connection of pump heads in series for a higher vacuum, or in parallel for increased delivery • For use with rotary evaporators, gel dryers, vacuum and filtration ovens
Fume extraction and neutralisation system. This instrument is composed of a ''Scrubber'' unit that blocks the passage of acid condensation and neutralises the gases in an NaOH solution, and a water re-circulation pump that proportions a large vacuum throughput for sucking up fumes.
• 100 % oil free • Audible level: 45 dBA • ME1C, ME2C NT and ME4C NT with PTFE membranes when chemical resistance is necessary • PTFE sandwich membrane: one PTFE layer, one FPM payer, one fibre layer for excellent chemical and mechanical resistance • Maintenance free
• Suitable for Vacuum filtration, Solvent purification, Solid-Phase Extraction (SPE), Gel electrophoresis • All wetted parts of the Pump in contact with air are made of PTFE material which can resist most of corrosive gases • Without the need of lubrifiant, regular oil changes and maintenance; with no oil pollution • Built-in thermal protection device to shut off the pump automatically when overheated and then resume working when the temperature cools down • The Chemker 411 pump is equipped with a moisture trap and a valve for vacuum adjustment
• Suitable Filtration for microbiology test, Vacuum filtration, Air sampling and Suspended solid test • With vacuum regulator to adjust vacuum • Driven by Piston, without the need of lubricant, regular oil changes and maintenance • Equipped with Prote™ overflow protection which can prevent a large amount of liquid from being sucked into the pump (Excluding 800 and 810 models) • Equipped with filter cartridge in air inlet to filter particle and moisture to prolong the life of pump(as well as in air outlet for 430 and 600models) • Built-in thermal protection device to shut off the pump automatically when overheated and then resume working when the temperature cools down
• Small footprint • Integrated speed control • 100% oil-free for contamination-free transfer, discharge and compression
Pumps N 820 G and N 840 G: • Expandable: separators and/or capacitors can be purchased separately and easily installed • 3 colour status display: on / pause / error • Internal atmosphere according to ATEX II 2/-G IIB+H2 T3 • High compatibility with steam and condensation • Air ballast
• 100% oil-free, abrasion-free, no wearing parts • Frictionless operation: no particle generation • RS485 interface with Modbus RTU protocol for remote control of the pump • Noise level: 55 dBa • 10C version for increased chemical resistance
• Temperature range up to +200 °C • Vacuum setting range: 5 mbar to 1100 mbar • Chemical resistant pump • 3 different capacities • Only 1 version: TwinDISPLAY • Anti-shattering door structure • Separately adjustable and directly heated trays • Stainless steel inner casing and outer wall • Programming via ControlCOCKPIT or AtmoCONTROL • Premium module: includes inert gas communication (for VO49 AND VO101), digitally controlled programmable gas inlet with flow reduction, Mobilealert (separate error message for temperature and pressure) • 3 year warranty
• High chemical resistance and good condensate tolerance • High flow rates even near the ultimate vacuum • Good ultimate vacuum under air/inert gas ballast • Quiet operation: 45 dBA
Pump unit MZ2CNT +AK SYNCHRO + EK: • For synchronous operation of two applications with manual vacuum control • AK suction separator at pump inlet for condensate recovery • EK vapour condenser at pump outlet for efficient solvent recovery
• Flow rate from 2.3 to 8.9 m3/h • High water vapour compatibility due to optimised air ballast • Large useful oil volume = Longer oil change intervals • Oil circuit with shut-off seal against ingress of corrosive gases and oily impurities into the unit at standstill to prevent corrosion • Easy maintenance thanks to telescopic construction • Made in Europe, 1 year warranty
• Good resistance to chemical agents • For pumping acidic or basic oxidants or vapours • Viscosity at 40 °C 95 mm2/sec • Can be used for all Vacuubrand RE/RZ/RC pumps • Minimum oxidizability
• Possibility of transferring caustic liquids • Valve to prevent toxic fumes from escaping • Submerged tube Ø 32 mm • All PTFE/PVDF valves • Warranty 3 years • Outlet either angled or with drain hose (1.2 m long)
• Regulates and controls your vacuum applications • Separate control unit with pressure sensors and two-step controlled valve to be placed independently from the operating unit • Weight: 1,2 kg
• Motor protected against overheating, automatic switch-off in case of permanent overload • Suitable for 24/7 continuous operation • Constant speed even with load changes • Changing the direction of rotation of the pump clockwise or counter-clockwise • Up to two stackable units • Warranty 3 years